StrongPWR SET – 45W Eurorack power supply bundle

229.00
274.80 with EU VAT

Everything what you need for powering of your case is included in one SET. StrongPWR SET is best power choice for eurorack studio and traveling cases…

Clear

Description

Konstant Lab Power SET is ideal choice of power for DIY case builders. Everything what you need for powering of your case is included in one SET. StrongPWR SET is best choice for Eurorack Studio and traveling cases.

StrongPWR SET – include 45W of power in 4HP eurorack module (+12V / 2A, -12V / 1.2A, +5V / 1.5A), two Filtered bus boards each of them has 18 output headers (6 filtered and 12 direct), 60W Meanwell medical type Power brick, 16-16pin flat cables for bus board connection, spacers and screws.

StrongPWR is powerful, low noise, highly efficiency and low weight PSU for use in eurorack systems and portable eurorack cases. Front panel contains a USB connector for charging smartphone, tablet, supply light lamp or external sequencer. In normal operation mode when the power switch is ON, LEDs are light on green. LEDs goes out when some rail is overload or short.
Panel is made from high quality CNC milled anodized aluminium. Many electronic parts are SMD type. StrongPWR is made on quality PCB with cooper thickness of 70um, which ensures reliability of StrongPWR and minimal losses on PCB routes. There is also possible to connect second StrongPWR via ChainPWR cable and feed two StrongPWRs with only one powerbrick (we recommend 120W powerbrick for two StrongPWRs).

Filtered Bus Board is low profile bus board with extra filtered output headers. Bus board contain 18 output headers. 12 direct headers and 6 filtered headers with LC filters. The filtered headers are dedicated for feeding analog modules which are sensitive to power quality. Filters reject noise caused by PSU and digital modules by 70%. Each power rail is protected against overvoltage for modules safety. 90% bus board area has high only 11mm with inserted connectors. This feature made Filtered bus board ideal power distribution solution for skiff cases.

Additional information

Weight 1178 g
Dimensions 43 × 30 × 5 cm
POWER

45w

OUTPUT

+12V / 2000mA, -12V / 1200mA, +5V / 1500mA

Typical output ripple noise

under 25mVpp / 20MHz BW

NUMBER OF HEADERS

Total 34 output shrouded headers

OTHER FEATURES

Overvoltage protection on PSU also on each bus board – keep your modules safe
Unique LC filtering circuits
LEDs indicate presence of voltage and voltage drop
Easy for montage and connection
Medical type Meanwell power brick with worldwide input range
All parts for PSU system included (PSU, Powerbrick, Busboards, powercord, screws, spacers…)

Plug

EU Plug, GB Plug, USA Plug

Filtered Bus Board Manual

Download

StrongPWR Manual

Download